Lifting cargo lift solenoid valve installation Note

Actuated valves solenoid valve is a voltage, which means that is activated by an electrical charge. Lifting cargo lift under pressure using oil as a primary energy source, this became a lifting cargo lift hydraulic solenoid valve the solenoid valve when fluid is introduced to its port, or an opening. Fluid is used for a variety of activities, such as moving a cylinder or mining, or tilt and fishing a snowplow. The working of the valve, the flow either directly, or to stop or start the flow of fluid.
1, the installation should pay attention to the arrow on the valve body should be consistently flows to with the medium. Not install where there is direct dripping or splashing water. Solenoid valves should be installed vertically upward.
2, solenoid valve should be at least the power supply voltage is the rated voltage within the 15%-10% range of work.
3, solenoid valve after installation, without back-pressure in the pipeline. And power up several times, so that optimum temperature before they can officially put into use.
4, solenoid valve should be thoroughly cleaned before installing piping. Media access should be free of impurities. Valve installed before filter.
5, when the solenoid valve fails or when cleaning, to ensure the system continues to run, install bypass device.